{{ $t('shop.all.spaetbestellservice.hinweis') }}
size | 35 |
Stroke per gripper jaw [mm] | 12,5 |
Max. exchange precision [mm] | <= 0,2 mm |
Max. gripper jaw play ax, ay [deg] | < 0,5 deg |
Max. gripper jaw play Sz [mm] | < 0,02 mm |
Rotational symmetry [mm] | <= 0,2 mm |
Repeatability grippers [mm] | < 0,02 mm |
Quantity Gripper jaws | 2 |
installation position | arbitrary |
Principle of operation | double acting |
Gripper function | Parallel |
Construction set up |
lever, Force controlled movement cycle |
Guide | sliding guide |
Position detection | For proximity switch |
Operating pressure [bar] | 4 to 8 |
Max. working frequency gripper [Hz] | 2 |
Min. opening time a 6 bar [ms] | 131 |
Min. closing time at 6 bar [ms] | 99 |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible (required in further operations) |
Corrosion resistant class KBK | 1 - low corrosion stress |
ambient temperature [°C] | 5 to 60 |
Mass inertia [kg/cm²] | 12,726 |
Max. force on gripper jaws Fz static [N] | 450 |
Max. torque on gripper jaws Mx static [Nm] | 50,0 |
Max. torque on gripper jaws My static [Nm] | 50,0 |
Max. torque on gripper jaws Mz static [Nm] | 50,0 |
Lubrication interval guide elements [Mio SP] | 10 |
Max. mass per external griper finger [g] | 450 |
Product weight [g] | 1.345 |
Fastening type |
Selectively:, Female thread and centring sleeve, With Throughway bore and centring sleeve |
Pneumatic connection | G1/8 |
Material information | RoHs compliant |
Cover cap material | PA |
Housing material |
Aluminium wrought alloy, Hard anodised |
Gripper jaws material | High-alloyed stainless steels |
Gripping force safety | When closing |
{{ $t('shop.all.gewicht') }} | 1.345 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84798997 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.